NON-SHRINK GROUTS

NanoGrout A – Expanding additive for mortars and grouts
A powder admixture for cementitious grouts and mortars. Applications include grouting of post tension cable ducts, tunnel linings, sheet pile anchors, rock and soil anchoring, concrete crack injection, etc.


NanoGrout Aid – Plasticising and expanding additive for post-tensioned cable duct grouting
A non-shrink additive in powder form. Applications include grouting of post tension cable ducts, tunnel linings, sheet pile anchors, rock and soil anchoring, concrete crack injection, non-shrink concrete, etc.


NanoGrout CFG – Pre mixed grout for post-tensioned cable ducts and sonic tubes in concrete piles
Grouting of post-tensioned cable ducts, sonic tubes in the concrete piles, non moving concrete crack injection, rock anchors, sheet pile anchors, etc.


NanoGrout VF – Non-shrink cementitous void filling grout
A cementitious, non-metallic, non-shrink, free flowing grout. Can be used for grouting of bolt pockets, base plate, precast panel joints, tie holes, etc.


NanoGrout GP – Non-shrink, cementitious performance grout
A cement based, non-metallic, non-shrink, free flowing grout that maintains a fluid consistency for a longer duration. Can be used for grouting of bolt pockets, base plate, precast panel joints, tie holes, etc.


NanoGrout PG – Shrinkage compensated, free flow cementitious, precision grout
Grout for heavy machinery base plates, crane rails, bridge bearings, bolt pockets, precast panel joints, tie holes, etc.


NanoGrout HES – High early strength, free flow, non-shrink cementitious grout
Grout for heavy machinery base plates, crane rails, bridge bearings, bolt pockets, precast panel joints tie holes, etc.


NanoGrout RES – Rapid early strength, free flow cementitous grout
Used for grouting where quick installation is required to facilitate loading within few hours.


NanoGrout MG – Cementitious non-shrink grout for deep pour applications
Large volume grouting for machinery base plates, crane rails, bridge bearings, bolt pockets, precast panel joints, etc.


NanoGrout SG – Epoxy based structural adhesive & anchor grout
Grouting of bolt pockets, bar anchor, starter bars, bridge bearing, boom fixing, etc. Adhesive for precast concrete components, steel to concrete, etc.


NanoGrout EG – High strength epoxy resin grout
Grouting of heavy machinery base plates with rotary/reciprocatory movements like, compressors, generators, turbines, centrifugal pumps, bolt pockets, crain rails, bridge bearing, pile head reprofiling, etc.


NanoGrout EGLE – Low exothermic epoxy resin grout
Grouting of heavy machinery large base plates with rotary/reciprocatory movements like, compressors, generators, turbines, centrifugal pumps, bolt pockets, crain rails, bridge bearing, pile head reprofiling, etc.