CONCRETE REPAIR SYSTEMS

ReCon PH – Single component cementitious fairing coat and pin hole repair mortar
Cosmetic repair material for precast concrete elements, columns, beams and fair faced concrete.


ReCon GP – Polymer modified, fibre reinforced, cementitious structural repair mortar
Repair of honeycombs, blowholes, tie rod holes and damages in concrete structures.


ReCon HS – High strength, fibre reinforced cementitious structural repair mortar
Repair of honeycombs, blowholes, tie rod holes and damages in concrete structures.


ReCon 35LW – Repair of honeycombs, tie rod holes and damages in concrete structures
Concrete repair in vertical and over head locations.


ReCon 75LW – Light weight high build cementitious repair mortar
Concrete repair in vertical and over head locations.


ReCon MC – Non-shrink free flow cementitious micro concrete
Repair of large sections & cavities, encasement / jacketing of structural elements, difficult access locations, pile head, etc.


ReCon MC40 – Shrinkage compensated polymer modified micro concrete
Repair of large sections, encasement of structural elements, difficult access locations, pile head, concrete floor reinstatement, architectural waterproof screed, etc.


ReCon PC – Cementitious, pile cap reprofiler
Reprofiling pile top, encasement / jacketing of structural elements, repair voids where structural continuity is required.


ReCon RESC – Rapid strength, dry pre mix repair concrete
Repairing concrete sections, floors, aprons, etc., where fast installation of work is required within few hours like cold storages, freezer rooms, factory floors, run ways, etc.


ReCon Zinc – Zinc rich anti corrosive primer
Anti corrosive protective coating over steel reinforcements and metal surfaces of concrete structures in aggressive environments.


ReCon ST – Aluminum rich anti-corrosive primer
Anti corrosive protective coating over steel reinforcements and metal surfaces of concrete structures in aggressive environments.


ReCon AP – Acrylic putty
To repair minor surface defects on concrete, plasters, etc.


ReCon AP Primer – Acrylic Primer
Primer for cementitious substrates viz. concrete walls, plasters, renders, etc. before application of acrylic putty.


ReCon LVE – Low viscosity epoxy resin for crack injection
Crack injection in structural members such as columns, beams, foundations, walls, decks and water retaining structures.


ReCon FCE – Epoxy fairing coat putty & blow hole filler
Epoxy repair putty for minor imperfections from feather edge up to 3 mm, crack sealing, pinhole repairs, etc.


ReCon PU F – Polyurethane crack injection flexible foam
To stop flowing water temporarily through concrete cracks, rock faults, soil stabilisation,etc.


ReCon PU R – Polyurethane crack injection resin system
To seal moving and non moving cracks in concrete structures such as water tanks, basement wall, slab, roofs, masonry, etc.


ReCon PTE – Epoxy pile encapsulation system
Encapsulation of pile top to provide water tightness, pourable epoxy patch repair material, etc.


ReCon ME – Epoxy mortar
Epoxy bedding for repair of horizontal surfaces such as industrial floors, bridge decks, patch repair works, airport runways, manhole benching, etc.


ReCon Wrap CF – Carbon fibre strengthening system
Strengthening by wrapping of structural elements viz. beams, columns, walls, slabs, piers, bridges, silos, chimnies, etc.


ReCon Wrap GF – Glass fibre strengthening system
Strengthening by wrapping of structural elements viz. beams, columns, walls, slabs, piers, bridges, silos, chimnies, etc.


ReCon Plate CFL – Carbon fibre laminates
Strengthening of structural elements such as column, beam, slabs specifically where improvement to shear strength and deformation properties are required.